EDS phase III problems

[zacka]

Hi
i´m very bad in english, but i hope you understand

I mount all the cables in the motronic box.. inkl chipp and everything..

But is not working
I got just 0.3 bar .. why?
the waste gate spring is adjusted korrekt ...
And i just got 0.3 bar in step 1 like the step 12.. it´s alwase 0.3 bar..Can you help me
Please :-(

 

[Mando]

Hi,

did you mount the chips correctly? are they completely pushed in?is the "dampfrad" knob conected properly?

check these things if they are all correct maybe you should mail EDS

regards mando

 

[zacka]

HI
the chips is mounted correct.. all rhe cables is correct..
But i got now 0.5 bar with the original waste gate spring adjustement...
But when i turn the switch from step1 to a higher=nothing change !

I will test to chek the motronic box againe

 

[Beany]

Please check the cables from the switch to the control box. If the connection iss broken than the control box will only make the minimum Preasure...

Regards

Beany

 

[zacka]

Hi
I not found the problems with phase III
But i mabe send my motronic box to EDS for cheking!!!
But EDS dont answer my mail!!!
I have a opel mitting 09/06 here in sweden :-(

 

[zacka]

ARNO

CAN YOU SEND ME A E-MAIL
I MOST HAVE THE PHASE 3 MOTRONIC BOX BEFORE THE 8/6 :-(

 

[ASH]

Hi Zacka !

Yesterday your girlfriend called me , we send out today a new control board and switch , that should fix the problem !

Please only reply to [email protected] , any other old account dont work !

regards ASH

 

[zacka]

OK
Thanks
I hope that works..

..//zacka

 

[zacka]

Tanks everybody for all help i get..
Now its working..

Thanks ARNO for the parts...
Its works perfekt

..//zacka
Sweden