Phase 3 step1

[jackb77]

Why the step 1 of my ph3 hold boost 0,6-0,7?? And step 12 1,1 with overboost 1,5.

The step one must be 0,3?!

 

[DD]

Step1 depends on your setting of the wastegateactuator!

 

[jackb77]

And if I modify the setting of my actuator, it don't hold the boost of step12.

So this electronic switch don't work as EDS say....

 

[DD]

It works with a correct actuator and a not broken wastegateseat!
If all this is okay, it works!

BTW: Your 11 Step-version is a very old one.

 

[jackb77]

My switch have 12 position but with a small piece it is blocked to 5, I have removed this for fit to my dash and now I don't know how to set! So now this switch have 12 pos.

So this is an old version??? I buy it from EDS on December 2003! :shock:

 

[MadScientist]

The 5 positions used when turned completly to the left, are the ones to use

You can also put the little blocker back :wink:

 

[jackb77]

The 5 positions used when turned completly to the left, are the ones to use

You can also put the little blocker back :wink:

I have done some test but every position on the switch give me 1.1bar!
Why? Maybe the switch is broken?