Garrett T32

[GSI-TURBO]

Does anyone have expirience with a Garrett T32 charger or any other Garrett charger on his C20let engine ?

I still don't have my EDS K26 charger, so i have to buy a Garrett or something else to drive at the zandvoort circuit this weekend..
When the K26 MAYBE arrives i will return it to EDS.. Sorry for the EDS guys but this is NO service.

Arno ?? can you please contact me to discuss what to do now ???

 

[Samy]

Yes we use one Garrett T04E on our C20LET Engine.
With such an turbocharger you can get to the limits of the engine, the charger isn't the restricting factor anymore.
With the smaller exhaust (T04E/3) side you can get high power in high revs without an to long power loss in lower revs.

Look on our Page www.vmax.de click on
"Fahrzeuge"
"E30LET #2"

There you can find a picture with our Garrett T04(92mm Compressorwheel) and the stock C20LET(56mm Compressorwheel) Charger.

In the coming weeks we are going to make some dynoruns. Then i can sent you the diagramm with the power curves.

 

[GSI-TURBO]

Hey !!! that's sounds very nice !

On paper the "full ball bearing" looks very nice in point of spool-up time of the turbocharger...

Hope to hear something soon of the power-diagrams

 

[DD]

@GSI-TURBO: Why don´t you ask Arno directly for your K26, instead of posting it here? I´ve seen the old bearings - very scratchy! Didn´t you change the oil?

 

[GSI-TURBO]

I am trying to call EDS but no one is there.
And yes, i always changed the oil BEFORE using an other turbo.

And how in the world can he say that "dirty oil with metal in it" cant damage a engine ? I check the oil which cames out of the engine after eds K26 chager 1 and 2, and there was NO dirty mess in the oil.

So what's worng.... i know... too Much.

I will try to call EDS today again, to make an dicission about the K26.
In any case i can't thrust the EDS K26 charger anymore. I paid a lot of money for 2,5 months NO driving.

I will also check again all the pipes and hosen to make sure no metal is inside.. If we will fing metal though, then there is a REALY BIG problem !!

Okay, lets see if i can reach you guys today..

Regards,

Dennis