Need a spec for a Garrett T04E turbo charger

Diskutiere Need a spec for a Garrett T04E turbo charger im International Corner Forum im Bereich Technik; Help someone on here mus have a ruff idea what spec of T04E turbo charger i need for on a LET nova. I want 450bhp max and am struggeling deciding...
R

Rick Draper

Dabei seit
10.01.2003
Beiträge
15
Punkte Reaktionen
0
Help someone on here mus have a ruff idea what spec of T04E turbo charger i need for on a LET nova. I want 450bhp max and am struggeling deciding what spec to get? I want one like the EDS nova but cannot find the spec anywhere.

Thanks
Rick Draper
 
A

AstraTurbo

Dabei seit
01.05.2002
Beiträge
57
Punkte Reaktionen
0
Ort
Norwegen
Use a MHI TD04HL-19T with external wastegate (it has integrated wastegate but will performe more with big external). Then you have a turbo for 4-450hp if you have the engine right set up with other special parts. I'm installing a turbo like this now on my Vectra Turbo and are looking for 400hp+ (will be dyno tested in april on our brand new Mustang dynamometer). We have dyno tested (on a other strict dyno!) a Rekord D with c20let, this turbo (with original integrated wastegate), throttle bodies ++ at 368,5hp at the rear wheels at 1,3bar. Estimated by the dyno was 410hp at the flywheel.

Why I recommend this turbo? It's fairly cheap and it loads a lot of pressure already at 2.000rpm.
 
Thema:

Need a spec for a Garrett T04E turbo charger

Need a spec for a Garrett T04E turbo charger - Ähnliche Themen

It is imperative that you do follow all the safety: Riding a skateboard always has some risk associated with it. However, you can do your part to be responsible and to have fun with it at the same...
like cocktail parties, wedding anniversaries, weddings or: Pandora Jewelry Charms Are usually correct way to measure your current wrist bracelet Pandora? Undoubtedly, the easiest way to get fitted to get a...
Vectra A / Calibra Turbo power steering pipes 1993->: Hello! I want to buy 2 pipes which goes from power steering pump forward. Only pipes without rost and in very good condition. I am also interested...
ARP Schwungradschrauben mit ARP moly lubricant anziehen?: Hi zusammen! will demnächst mein feingewuchtetes Bastuck Schwungrad verbauen und habe mir für meine ARPs die spezielle moly lube besorgt. In der...
X20XEV Phase3 is not producing the promised power: Hey, I hope you can help with a huge problem I have with my Vectra B X20XEV engine. I have bought a EDS Phase 3 kit for it and installed it with...
Oben