JavaScript ist deaktiviert. Für eine bessere Darstellung aktiviere bitte JavaScript in deinem Browser, bevor du fortfährst.

Auf Thema antworten

Beitrag: [QUOTE="JohnM, post: 574968, member: 9191"] Hi Mel I don't profess to know much about the Phase chips but no doubt you should be able to get some definitive answers on this forum. As far as I am aware the Phase 1, 2 & 3 chips all use the standard injectors. The increased fuelling requirements being taken care of by increasing fuel pressure. I would expect the Phase 1 and Phase 2 chips to have have different fuel maps. Phase 1 at 3.0bar and Phase 2 at 3.5 bar. If the Phase 1 chip is designed for using 3 bar fuel pressure then you will be over fuelling at 3.5 bar. I would not expect your mods to give a cumulative increase in power. The Phase 1 with I/C should be better than with the chip alone but I would not expect the same results as with the Phase 2 kit. It will be interesting to see what power output you get on the rollers. As I said in my earlier post I belive that the standard injectors are best as long as they can provide sufficient fuel. I wouldn't want to go above 4.0 bar though. Regards JohnM [/QUOTE]

Authentifizierung: Überprüfung durch Google ReCaptcha zulassen

Es ist eine Überprüfung durch Google ReCaptcha erforderlich, diese wird durchgeführt sobald der Datenschutzerklärung zugestimmt wurde.