JavaScript ist deaktiviert. Für eine bessere Darstellung aktiviere bitte JavaScript in deinem Browser, bevor du fortfährst.

Auf Thema antworten

Beitrag: [QUOTE="Gsimad, post: 672619, member: 9417"] Betreff: Stalling C20 LET I am having a problem with my car stalling at junctions and roundabouts. This only happens sometimes!!! There is also a problem with the engine sometimes not starting ie if the engine has been running and at operating temp and switched off for a short time like 5-10mins it starts but has to build up pressure like priming fuel pump. Rev counter also has to build up to 3000-4000rpm. It starts everytime but with a delay. No fault codes The engine spec C20LET conversion Coscast Head Standard for now - Ported polished and gasflow head to be fitted with Evo 6 cams Bosch F5 DPOR plugs Bottom end- wallace Performance rebuild Oil spray bars Crank regrind ARP rod bolts uprated JE pistons Z20LET metal head gasket - 2 gaskets to be fitted when new head is going on. V-max K26/24RS 400PS turbo Wallace Performance -4 actuator- Dawes device limits boost to 10psi V-max 60mm top hat V-max Evo 310 software - Evo 360 software to be installed with head and cams V-max Adjustable FPR (4.5Bar) Evo 6 motorsport fuel pump - Rated to 500BHP Standard injectors - 550ccm injectors to be fitted with software. Turbo XS blow-off valve 60mm pipe work Evo 6 intercooler K&N cone Filter Direct cold air intake Powerflow Exhaust 2.5" with 4" Jap tail pipe DSOP downpipe with seperated wastegate No CAT I have replaced with new Crank shaft sensor Idle control valve Air flow meter Coolant sensor Air temp sensor Lambda sensor- Bosch Dump valve for new Baileys and XS blow off valve Cone filter is about 15" from turbo inlet Engine runs fine and makes good power. hope you can help with my 2 problems Thanks Craig [/QUOTE]

Authentifizierung: Überprüfung durch Google ReCaptcha zulassen

Es ist eine Überprüfung durch Google ReCaptcha erforderlich, diese wird durchgeführt sobald der Datenschutzerklärung zugestimmt wurde.