JavaScript ist deaktiviert. Für eine bessere Darstellung aktiviere bitte JavaScript in deinem Browser, bevor du fortfährst.

Auf Thema antworten

Beitrag: [QUOTE="T.F.S., post: 604512, member: 9631"] hi the reason why my boost was not working correctley.( the boost was not rising over 7 psi,) was because i had not soldered the boost controller to the motherboard i had only soldered in the wires that connect to the rest of the kit i now have a diffrent problem.......... the car holds boost fine, it boosts up to 22psi and holds at 19psi no problems there but it does not feel as fast as my phase 1 did and on the dyno it only makes 250BHP compared to my phase 1 produceing 260.3BHP on the same dyno the power surges and falls when you are driveing normally at around 14PSI and the car jerks on slowdown when in gear i had sent the ecu to gavin wallace who inspected the ECU and informed me of my mistake (influenced by no instructions), whilst the ECU was with gavin he had kindly loaned me a standard ECU and my car performed fine, this proves that my present problem is not a wireing fault because the installiation of the kit has been inspected and corrected by one of your dealers and the car is otherwise in perfect working order i have not experanced the backfireing problem assoatiated with phase 3.5 and above allthough i agree that the backup and treatment of customers who have had the problem is poor good instructions are essential and yet we see these kits are now supplyed with the washers but no instructions on how or where to install them ash i would like to ask a few questions if i may 1. will owners of phase 3/3.5/3.5+ owners recieve the washers free of charge as well as the phase 4 owners? 2. are you makeing any efforts to bring owners of the above mentioned kits attention to the fact that there is a problem with their kits and they need to make changes to their engines?, ie: will the dealers who sold them the kit be calling them up and discussing this issue or do people just have to find out by themselves either by finding the route of the problem mechanicly or by looking on the internet (assumeing that they have and use a computer) 3. if i cannot find the route of the problem on my kit will i be refunded or have another kit sent to me? (hopefully with washers and instructions) regards, brian [/QUOTE]

Authentifizierung: Überprüfung durch Google ReCaptcha zulassen

Es ist eine Überprüfung durch Google ReCaptcha erforderlich, diese wird durchgeführt sobald der Datenschutzerklärung zugestimmt wurde.