JavaScript ist deaktiviert. Für eine bessere Darstellung aktiviere bitte JavaScript in deinem Browser, bevor du fortfährst.

Auf Thema antworten

Beitrag: [QUOTE="clutchmaster, post: 1084675, member: 12734"] Es gibt folgende Federn (von schwach zu stark): grün-gelb-blau-rot Deine sieht mir nach einer gelben aus. Achte mal auf den "Farbnebel" auf der Feder, eher gelb oder eher grün? erkennt man auf deinem Foto nicht 100%ig. so sieht meine aus: [URL=http://imageshack.us/photo/my-images/710/sdc111501600x1200.jpg/][img]http://img710.imageshack.us/img710/3954/sdc111501600x1200.th.jpg[/img][/URL] Hier damals die Erklärung von Forge: The following is general information regarding Forge actuator spring tensions and are important considerations when making a decision on which spring you install, especially if you are running a boost controller or have an ECU upgrade. The 4 springs we offer are listed below under their relevant colour codes and related pressure ratings. Running pressure is the lowest or minimum pressure the spring will operate at, which is important when considering which spring you choose. The spool up pressure is the vacuum pressure required start the spring moving, at which point the turbo waste-gate will start to open (spool up). The actual rating for these springs is as follows, the lower pressure being the spool up pressure and the higher pressure being the running pressure: RED 17 psi (spool up) - 20 psi (running pressure) our product code FMAS049R. BLUE 14 psi(spool up) - 18 psi(running pressure) our product code FMAS049B. YELLOW 9 psi(spool up) - 15 psi(running pressure) our product code FMAS049Y. GREEN 5 psi (spool up)- 10 psi(running pressure) our product code FMAS049G. The spool up can be altered to a higher pressure by adding more tension to the spring. Be careful not to add too much tension to the spring as it will become coil bound, affecting the rod travel and thus affect the waste-gates ability to open effectively .Running press cannot be adjusted by adding pressure to the spring. [/QUOTE]

Authentifizierung: Überprüfung durch Google ReCaptcha zulassen

Es ist eine Überprüfung durch Google ReCaptcha erforderlich, diese wird durchgeführt sobald der Datenschutzerklärung zugestimmt wurde.